Ventilation Solutions


Hatch Fans
In-Line Fans for Ducts
Axial Fans
Centrifugal Fans
Fans for Ovens
Smoke Extract Fans 400ºC/2h - 300ºC/2h
Pressurisation Systems for Staircases, Fire-fighting Lobbies and Escape Routes
Explosive Atmospheres ATEX fans
Heavy Duty Fans for Industrial Applications
Roof Fans
E.C. Technology and Efficient Fans
Ventilation for Houses
Heat Recovery Units
Air Purifying and Filtration Units
Air Curtains
Accessories


CMR
Extremely robust medium pressure, single inlet centrifugal fans fitted with backward-curved impellers

Fan:
- Sheet steel casing.
- Impeller with reaction blades in extremely robust sheet steel.

Motor:
- IE3 efficiency motors for powers equal to or greater than 0.75 kW except single-phase, 2-speed and 8-pole.
- Class F motors with ball bearings and IP55 protection.
- Three-phase 230/400 V - 50 Hz (up to 4 kW) and 400/690 V - 50 Hz (powers higher than 4 kW).
- Maximum temperature of air to be carried: -20 °C +120 °C.

Finish:
- Anti-corrosive finish of polyester resin polymerised at 190 °C, previously degreased with phosphate-free nanotechnological treatment.

On request:
- Special windings for different voltages.
- Fan prepared for air transmission of up to 250 °C.
- Stainless steel fan.
- Category 2 ATEX certification (see CMR/ATEX series).