Ventilation solutions


Hatch Fans
In-line Duct Fans
Axial Fans
Centrifugal Fans
Fans for Ovens
Smoke Extract Fans 400 ºC/2h - 300 ºC/2h
Pressurization Systems for Stairs, Lobbies and Escape Routes
Explosive Atmospheres ATEX fans
Heavy Duty Fans for Industrial Applications
Roof Fans
EC Technology and Efficient Fans
Ventilation for Houses
Heat Recovery Units
Air Purifying and Filtration Units
Air Curtains
Accessories

Centrifugal Fans for Industrial Applications


CMR
Very robust single inlet medium pressure centrifugal fans, equipped with a backward impeller

Fan:
• Sheet steel casing.
• Backward curved impeller in highly robust sheet steel.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings, IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Maximum temperature of air to be carried: -20 ºC +120 ºC.

Finishing:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +250 ºC.
• Stainless steel fan.
• Category 2 ATEX certification (see CMR/ATEX series).