Ventilation solutions


Hatch Fans
In-line Duct Fans
Axial Fans
Centrifugal Fans
Smoke Extract Fans 400 ºC/2h - 300 ºC/2h
Pressurisation Systems for Staircases, Lobbies and Escape Routes
Explosive Atmospheres ATEX fans
Fans for Ovens
Fans for Industrial Applications
Roof Fans
EC Technology and Efficient Fans
Indoor Air Treatment Solutions
Ventilation for Houses
Air Curtains
Accessories

Fans for Industrial Applications


CMRS
Very robust single inlet medium pressure centrifugal fans, equipped with a backward impeller

Fan:
• Sheet steel casing.
• Backward curved impeller in extremely robust sheet steel, specially designed for clean or dusty air.
• Directly coupled motor.
• Fitted with inspection hatch, except models 350, 400, 450, 500 and 560.
• With inspection and cleaning hatch from size 560 and up.
• Sizes larger than 1250 will be supplied with split casing to facilitate transport.
• Casing continuously welded from size 800 and up.
• Maximum temperature of air to be carried: -25 ºC +120 ºC.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Special windings for different voltages.
• Fan prepared to transport air up to +300 ºC.
• Special executions for temperatures + 300 ºC.
• Stainless steel fan.
• ATEX certified Category 2.
• System 8 elastic coupling.