Ventilation solutions


Hatch Fans
In-line Duct Fans
Axial Fans
Centrifugal Fans
Smoke Extract Fans 400 ºC/2h - 300 ºC/2h
Pressurisation Systems for Staircases, Lobbies and Escape Routes
Explosive Atmospheres ATEX fans
Fans for Ovens
Fans for Industrial Applications
Roof Fans
EC Technology and Efficient Fans
Indoor Air Treatment Solutions
Ventilation for Houses
Air Curtains
Accessories


HC
Wall mounted axial fans with IP55 motor

Wall mounted axial fans with fiberglass reinforced plastic propeller.

Fan:
• Steel sheet support frame.
• Fibreglass reinforced polyamide-6 impeller.
• Protection grid against contacts according to UNE-EN ISO 12499.
• Models 71, 80, 90 and 100: The protection grid is supplied as an accessory.
• Airflow direction from motor to impeller.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings. IP55 protection. Except single-phase models from size 45 to size 63, with IP54 protection. 1 or 2 speeds depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +60 ºC.

Finish:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Motor, impeller and grille assembly (F version), except models 71, 80, 90 and 100, which are supplied without a grille.
• Motor, impeller assembly (version G).
• Airflow direction from impeller to motor.
• Special windings for different voltages.