CENTRAL CO-NO2
Monoxide and dioxide detection control panels for car park ventilation control
To comply with Royal Decree 2367/1985 and the Spanish Technical Building Code, carbon monoxide (CO) and nitrogen dioxide (NO₂) detection systems are designed for application in underground car parks, tunnels or other spaces where hazardous gas concentrations may accumulate.
The system is based on conventional or addressable control panels with in-line connected diffusion sensors. Depending on the model, the control units allow from 1 to 4 ventilation zones.
CO sensors must be distributed throughout the enclosure in accordance with installation standards/regulations. A recommended coverage for these devices can be between 200 and 300 m2, placing them at a height of between 1.5 and 2 m from the ground.
Characteristics:
• Certified system according to UNE 23300 standard.
• Factory calibration and diffusion sensors for lifetime operation.
• Conventional (1 zone) and addressable (2 to 4 zones) control panels.
• Indication of the concentration per area.
• 2 extraction relay outputs by zone.
• 1 alarm relay output per zone.
CENTRAL CO-NO2 Z1 Series Control Panels:
• Conventional control panel for 1 ventilation zone.
• Number of ventilation outputs: 2 independent outputs plus 1 alarm output.
• Supply voltage from 110 V to 230 V AC 50/60 Hz.
• Power: 65 W.
• 3-digit display with concentration display.
• Number of detectors: up to a maximum of 20 CO or NO₂ detectors that can be combined.
CENTRAL CO-NO2 Z2 to Z4 Series Control Panels:
• System designed according to EN 50545-1.
• Addressable control panels with 2, 3 or 4 zones.
• Number of ventilation outputs: 2 independent outputs plus 1 alarm output.
• Supply voltage from 110 V to 230 V AC 50/60 Hz.
• Power: 70 W.
• LCD display with detailed system information.
• Number of detectors: up to a maximum of 25 CO detectors and 25 NO₂ detectors.
SENSOR CO Series CO Detector:
• Wall mounted CO detector.
• Technology: electrochemical cell.
• Service life: 10 years.
• Reading interval: Every 10 seconds.
• Recommended working area: 200-300 m².
• Protection rating: IP30.
NO2 Detector SENSOR NO2 series:
• Wall mounted NO₂ detector.
• Technology: electrochemical cell.
• Automatic conversion of NO₂ reading to equivalent value in CO for unified management.
• Service life: 4 years.
• Reading interval: Every 10 seconds.
• Recommended working area: 200-300 m².
• Protection rating: IP30.
The system is based on conventional or addressable control panels with in-line connected diffusion sensors. Depending on the model, the control units allow from 1 to 4 ventilation zones.
CO sensors must be distributed throughout the enclosure in accordance with installation standards/regulations. A recommended coverage for these devices can be between 200 and 300 m2, placing them at a height of between 1.5 and 2 m from the ground.
Characteristics:
• Certified system according to UNE 23300 standard.
• Factory calibration and diffusion sensors for lifetime operation.
• Conventional (1 zone) and addressable (2 to 4 zones) control panels.
• Indication of the concentration per area.
• 2 extraction relay outputs by zone.
• 1 alarm relay output per zone.
CENTRAL CO-NO2 Z1 Series Control Panels:
• Conventional control panel for 1 ventilation zone.
• Number of ventilation outputs: 2 independent outputs plus 1 alarm output.
• Supply voltage from 110 V to 230 V AC 50/60 Hz.
• Power: 65 W.
• 3-digit display with concentration display.
• Number of detectors: up to a maximum of 20 CO or NO₂ detectors that can be combined.
CENTRAL CO-NO2 Z2 to Z4 Series Control Panels:
• System designed according to EN 50545-1.
• Addressable control panels with 2, 3 or 4 zones.
• Number of ventilation outputs: 2 independent outputs plus 1 alarm output.
• Supply voltage from 110 V to 230 V AC 50/60 Hz.
• Power: 70 W.
• LCD display with detailed system information.
• Number of detectors: up to a maximum of 25 CO detectors and 25 NO₂ detectors.
SENSOR CO Series CO Detector:
• Wall mounted CO detector.
• Technology: electrochemical cell.
• Service life: 10 years.
• Reading interval: Every 10 seconds.
• Recommended working area: 200-300 m².
• Protection rating: IP30.
NO2 Detector SENSOR NO2 series:
• Wall mounted NO₂ detector.
• Technology: electrochemical cell.
• Automatic conversion of NO₂ reading to equivalent value in CO for unified management.
• Service life: 4 years.
• Reading interval: Every 10 seconds.
• Recommended working area: 200-300 m².
• Protection rating: IP30.