Indoor Air Treatment Solutions
CJBDT/ALS-FE
Ecology unit with direct drive motor, certified for 400 ºC/2h, double insulating wall, double inlet, and high-efficiency electrostatic filters
Ecology unit with high-efficiency electrostatic filters certified F400, equipped with a double inlet direct drive fan, acoustically insulated with double insulating wall, and with the possibility of adding an activated carbon filter stage.
Characteristics:
• Forward curved impeller in galvanised sheet steel.
• Structure in aluminum profiles and pre-lacquered outer sheet.
• 25 mm rockwool insulation in panels.
• Inspection hatch for maintenance.
• Access panels for filter removal for maintenance.
• Grease-collection tray.
• Integrated connection box.
• High efficiency (95% ePM1) 230 V (+-7.5%) 50 Hz electrostatic filter.
• Ventilation system with filtration approved according to the EN 12101-3 standard.
• Maximum temperature of air to be carried: S1 continuous operation -20 ºC +45 ºC. S2 operation: 400 ºC/2h.
Motor:
• Class H motors for S1 continuous operation and S2 emergency use. With ball bearings, IP55 protection and 1 or 2 speeds, depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 3 kW) and 400/690 V 50 Hz (powers greater than 3 kW).
• Working temperature: -20 ºC +50 ºC.
Filtration stages:
• Electrostatic filter: Removes medium and small ionized grease particles.
• Activated carbon filter (optional): Removes low concentrations of odour particles.
• Maximum temperature of air to be carried: -30 ºC +45 ºC.
On request:
• Circular outlet.
• Fans with vertical outlet.
• Particle sensor for automatic control.
BOXKITCHEN:
• Motor speed control by manual selection or by optional external sensors (SI-PM2.5+VOC).
• Integrated control system compatible with MODBUS RTU.
• Built-in temperature sensor.
• Filter status check.
• WiFi.
Characteristics:
• Forward curved impeller in galvanised sheet steel.
• Structure in aluminum profiles and pre-lacquered outer sheet.
• 25 mm rockwool insulation in panels.
• Inspection hatch for maintenance.
• Access panels for filter removal for maintenance.
• Grease-collection tray.
• Integrated connection box.
• High efficiency (95% ePM1) 230 V (+-7.5%) 50 Hz electrostatic filter.
• Ventilation system with filtration approved according to the EN 12101-3 standard.
• Maximum temperature of air to be carried: S1 continuous operation -20 ºC +45 ºC. S2 operation: 400 ºC/2h.
Motor:
• Class H motors for S1 continuous operation and S2 emergency use. With ball bearings, IP55 protection and 1 or 2 speeds, depending on model.
• Single-phase 230 V 50 Hz and three-phase 230/400 V 50 Hz (up to 3 kW) and 400/690 V 50 Hz (powers greater than 3 kW).
• Working temperature: -20 ºC +50 ºC.
Filtration stages:
• Electrostatic filter: Removes medium and small ionized grease particles.
• Activated carbon filter (optional): Removes low concentrations of odour particles.
• Maximum temperature of air to be carried: -30 ºC +45 ºC.
On request:
• Circular outlet.
• Fans with vertical outlet.
• Particle sensor for automatic control.
BOXKITCHEN:
• Motor speed control by manual selection or by optional external sensors (SI-PM2.5+VOC).
• Integrated control system compatible with MODBUS RTU.
• Built-in temperature sensor.
• Filter status check.
• WiFi.