Indoor Air Treatment Solutions
CJTXR-FE
Belt driven Ecology unit certified for 400 ºC/2h, with highly robust backward curved impeller and high-efficiency electrostatic filters
Ecology unit with high-efficiency electrostatic filters, F400 certification, equipped with a backward curved impeller and belt driven, acoustically insulated, with the option of adding an activated carbon filter stage. Suitable for commercial kitchen hoods where the removal of grease particles and odours is required.
Characteristics:
• Self-cleaning backward curved impeller.
• 25 mm rockwool insulation in panels.
• Inspection hatch for maintenance.
• Access panels for filter removal for maintenance.
• Grease-collection tray.
• Integrated connection box.
• High efficiency (95% ePM1) 230 V (+-7.5%) 50 Hz electrostatic filter.
• Approved according to EN 12101-3, for operation outside the fire zone.
Fan:
• Highly robust backward curved impeller with double inlet.
• Maximum temperature of air to be carried: S1 continuous operation +5 ºC +75 ºC. S2 operation: 400 ºC/2h.
Filtration stages:
• G2 washable filter: Retains large grease particles.
• Electrostatic filter: Removes medium and small ionized grease particles.
• Activated carbon filter (optional): Removes low concentrations of odour particles.
Motor:
• Class F motors with ball bearings and IP55 protection.
• IE3 efficiency motors.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Structure in aluminum profiles and pre-lacquered outer sheet.
On request:
• Particle sensor for automatic control.
• Possibility of adapting the transmission assembly to the left or right.
• Special windings for different voltages and frequencies.
BOXKITCHEN:
• Motor speed control by manual selection or by optional external sensors (SI-PM2.5+VOC).
• Integrated control system compatible with MODBUS RTU.
• Built-in temperature sensor.
• Filter status check.
• WiFi.
Characteristics:
• Self-cleaning backward curved impeller.
• 25 mm rockwool insulation in panels.
• Inspection hatch for maintenance.
• Access panels for filter removal for maintenance.
• Grease-collection tray.
• Integrated connection box.
• High efficiency (95% ePM1) 230 V (+-7.5%) 50 Hz electrostatic filter.
• Approved according to EN 12101-3, for operation outside the fire zone.
Fan:
• Highly robust backward curved impeller with double inlet.
• Maximum temperature of air to be carried: S1 continuous operation +5 ºC +75 ºC. S2 operation: 400 ºC/2h.
Filtration stages:
• G2 washable filter: Retains large grease particles.
• Electrostatic filter: Removes medium and small ionized grease particles.
• Activated carbon filter (optional): Removes low concentrations of odour particles.
Motor:
• Class F motors with ball bearings and IP55 protection.
• IE3 efficiency motors.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25 ºC +50 ºC.
Finish:
• Structure in aluminum profiles and pre-lacquered outer sheet.
On request:
• Particle sensor for automatic control.
• Possibility of adapting the transmission assembly to the left or right.
• Special windings for different voltages and frequencies.
BOXKITCHEN:
• Motor speed control by manual selection or by optional external sensors (SI-PM2.5+VOC).
• Integrated control system compatible with MODBUS RTU.
• Built-in temperature sensor.
• Filter status check.
• WiFi.