Rozwiązania Dla Wentylacji


Hatch fans
Ekstraktory linowe dla przewodów
Wentylatory Spiralne
Wentylatory odśrodkowe
Fans for Ovens
Ekstr. wyprowadzania dymu 400ºC/2h - 300ºC/2h
Pressurisation Systems for Staircases, Fire-fighting Lobbies and Escape Routes
Ekstr. obszarów wybuchowych ATEX
Heavy Duty Fans for Industrial Applications
Ekstraktory Dachowe
EC Technology and Efficient Fans
Wentylacja dla lokali mieszkalnych
Rekuperator Ciepła
Jednostki Filtracyjne
Kurtyny powietrzne
Akcesoria

Wall System


Pliki do pobrania:
Nota techniczna BIM (REVIT)
THT/WALL
Dynamic wall mounted extractor fans with motorised hatch, for smoke exhaust in case of fires, 400°C/2h and 300°C/2h

Dynamic wall-mount extractor fans with motorised opening system for connection to extract duct. Specially designed for the fast, effective exhaust of harmful smoke and gases in the event of fire. Suitable for installation in industrial buildings, stores or in any other type of building. Approved as a whole in accordance with standard EN 12101-3, with F-400 and F-300 certificate. Can be used for ambient ventilation.

Fan:
• Helicoidal casing support and fixing flange to allow easy wall anchorage and installation.
• With F-400 certificate number 0370-CPR-2823 and F-300 certificate number 0370-CPR-0973.
• Tubular casing in sheet steel with polyester resin anti-corrosive treatment.
• Variable angle impeller made of cast aluminium.
• Airflow direction from motor to impeller.

Extruded aluminum hatch:
• An extremely robust structure that is able to withstand severe weather changes.
• Designed to ensure watertightness.
• Aluminum profile with thermal bridge break.
• Central ceiling and structure equipped with high performance thermal insulation.
• Thermal resistance of the assembly less than 0.89 W/m2·K.
• Limit switches in both positions (open and closed).
• Manual opening system.

Motor:
• Class H motors for S1 continuous operation and S2 emergency use. With ball bearings, IP55 protection and 1 or 2 speeds, depending on model.
• IE3 efficiency motors.
• Three-phase 230/400V 50 Hz (up to 3 kW) and 400/690V 50 Hz (powers greater than 3 kW).
• Maximum temperature of air to be carried: S1 -25 ºC +40 ºC continuous service, also suitable for warm climates with temperatures up to 50 ºC. S2 operation, 300 ºC/2h, 400 ºC/2h.

Actuator:
• Reliability greater than 11,000 dual cycles.
• Supply voltage at 230V AC 50Hz.
• Working temperature: -25 ºC +60 ºC.

Flap finish:
• Anticorrosive in extruded aluminum.
• RAL7016 supplied as standard. Any other RAL can be supplied on demand.