Roof System Hatch Fans
HATCH/HP/IE5
Dynamic smoke exhaust roof fans with motorized opening, high thermal efficiency enclosure, and IE5 F400 ultra-high efficiency motor
Dynamic smoke exhaust fans with high thermal performance, completely airtight and hermetic, with thermal break and motorized opening. Equipped with a roof extractor for smoke evacuation in case of fire, 400 ºC/2h, and ultra-high efficiency IE5 motor.
Enclosure:
• Construction completely free of thermal bridges.
• 60 mm thick refrigerated sandwich panel sides made of two pre-coated steel sheets on the outside and inside with a high-density polyurethane (PUR) core.
• 60 mm thick cover filled with high-density polyurethane (PUR), made of galvanised sheet metal and coated on the outside.
• Adapter socket (or skirting) for correct and easy installation on the roof.
• Air permeability CLASS 4 (UNE-EN 12207).
• Impermeability against driving rain CLASS E 1350 (UNE-EN 12208).
• Resistance to high wind load.
• Thermal resistance of the assembly less than 0.39 W/m²·K.
• Airborne acoustic insulation value according to UNE-EN ISO 10140-2: Rw = 32 (-2;-4) dB.
Opening system:
• Motorised opening arm, with encapsulated IP65 mechanism.
• Supply voltage at 230 V AC 50/60 Hz.
• System reinforced and guaranteed with more than 20,000 cycles.
• Limit switches in both positions (open and closed).
• Snow load SL 1000.
• Automatic opening by external signal from the control system (fire panel, smoke detector ...). Control systems not included in the equipment.
Fan:
• An extremely robust structure that is able to withstand severe weather changes.
• Maintenance switches for actuator and fan disconnection with auxiliary contacts.
• Certified according to EN 12101-3, F400 classification.
• Tubular casing in sheet steel with polyester resin anti-corrosive treatment.
• Adjustable cast aluminum impeller.
• Shielded power cable with EMC protection.
Motor:
• Class H motors for S1 continuous operation and S2 emergency use. With ball bearings and IP55 protection.
• IE5 efficiency motors.
• Three-phase 230/400 V 50 Hz (up to 3 kW) and 400/690 V 50 Hz (powers greater than 3 kW).
• Maximum air temperature: Service S1 -25 ºC to +40 ºC continuously, also suitable for hot climates up to 50 ºC. Service S2 400 ºC/2h.
• Motors can be regulated by frequency inverter, even in an emergency.
Finish:
• Anti-corrosion cover made of galvanised sheet steel coated in RAL 7015.
• Aluminium profiles RAL 7015.
• Side panels RAL 7015.
On request:
• Motorised opening arm with supply voltage of 24 V DC.
• Exterior coated in any colour from the RAL chart.
• Customised finishes.
Enclosure:
• Construction completely free of thermal bridges.
• 60 mm thick refrigerated sandwich panel sides made of two pre-coated steel sheets on the outside and inside with a high-density polyurethane (PUR) core.
• 60 mm thick cover filled with high-density polyurethane (PUR), made of galvanised sheet metal and coated on the outside.
• Adapter socket (or skirting) for correct and easy installation on the roof.
• Air permeability CLASS 4 (UNE-EN 12207).
• Impermeability against driving rain CLASS E 1350 (UNE-EN 12208).
• Resistance to high wind load.
• Thermal resistance of the assembly less than 0.39 W/m²·K.
• Airborne acoustic insulation value according to UNE-EN ISO 10140-2: Rw = 32 (-2;-4) dB.
Opening system:
• Motorised opening arm, with encapsulated IP65 mechanism.
• Supply voltage at 230 V AC 50/60 Hz.
• System reinforced and guaranteed with more than 20,000 cycles.
• Limit switches in both positions (open and closed).
• Snow load SL 1000.
• Automatic opening by external signal from the control system (fire panel, smoke detector ...). Control systems not included in the equipment.
Fan:
• An extremely robust structure that is able to withstand severe weather changes.
• Maintenance switches for actuator and fan disconnection with auxiliary contacts.
• Certified according to EN 12101-3, F400 classification.
• Tubular casing in sheet steel with polyester resin anti-corrosive treatment.
• Adjustable cast aluminum impeller.
• Shielded power cable with EMC protection.
Motor:
• Class H motors for S1 continuous operation and S2 emergency use. With ball bearings and IP55 protection.
• IE5 efficiency motors.
• Three-phase 230/400 V 50 Hz (up to 3 kW) and 400/690 V 50 Hz (powers greater than 3 kW).
• Maximum air temperature: Service S1 -25 ºC to +40 ºC continuously, also suitable for hot climates up to 50 ºC. Service S2 400 ºC/2h.
• Motors can be regulated by frequency inverter, even in an emergency.
Finish:
• Anti-corrosion cover made of galvanised sheet steel coated in RAL 7015.
• Aluminium profiles RAL 7015.
• Side panels RAL 7015.
On request:
• Motorised opening arm with supply voltage of 24 V DC.
• Exterior coated in any colour from the RAL chart.
• Customised finishes.