CJTX-C
400º C/2h transmission extractor fan units in Magnelis sheet steel with maximum corrosion resistance according to ISO 12944
400 ºC/2h extractor fan units, with motor and transmission mounted inside the box, to operate outside the fire risk zone.
Fan:
• Structure in category C5 anti-corrosive Magnelis sheet steel.
• Forward curved impeller in galvanised sheet steel.
• Approved in accordance with standard EN 12101-3, with certificate no.: 0370-CPR-0468.
• Linear airflow direction.
Motor:
• Class F motors with ball bearings, IP55 protection and with 1 or 2 speeds, depending on model.
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Maximum temperature of air to be carried: S1 continuous operation -25 ºC +120 ºC. S2 operation, 300 ºC/2h and 400 ºC/2h.
Finish:
• Magnelis steel sheet.
On request:
• Fans with vertical outlet.
• ATEX certification.
Fan:
• Structure in category C5 anti-corrosive Magnelis sheet steel.
• Forward curved impeller in galvanised sheet steel.
• Approved in accordance with standard EN 12101-3, with certificate no.: 0370-CPR-0468.
• Linear airflow direction.
Motor:
• Class F motors with ball bearings, IP55 protection and with 1 or 2 speeds, depending on model.
• Motors with IE3 efficiency for powers equal to or greater than 0.75 kW, except single-phase, 2-speed and 8-pole.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Maximum temperature of air to be carried: S1 continuous operation -25 ºC +120 ºC. S2 operation, 300 ºC/2h and 400 ºC/2h.
Finish:
• Magnelis steel sheet.
On request:
• Fans with vertical outlet.
• ATEX certification.