Soluții de ventilare


Ventilatoare tip hatch
Ventilatoare in linie de tubulatura
Ventilatoare Axiale
Ventilatoare Centrifugale
Ventilatoare pentru cuptoare
Ventilatoare de Desfumare ce Rezista la 400 ºC/2h - 300 ºC/2h
Sisteme de presurizare
Ventilatoare ATEX pentru medii explozive
Ventilatoare robuste pentru aplicatii industriale
Ventilatoare de Acoperis
Ventilatoare eficiente si cu tehnologie EC
Ventilatie pentru locuinte
Recuperatoare de Caldura
Unitati de Filtrare
Perdele de Aer
Accesorii

Ventilatoare axiale robuste


HGT/CL
Large diameter tubular axial fans with direct drive motors

Tubular axial fans equipped with 6 or 9 blade aluminum propellers with various angles of inclination.

Fan:
• Airflow direction from motor to impeller.
• Impellers made of cast aluminium with 6 or 9 blades with adjustable angle of inclination.
• Sheet steel long casing.
• The long casing version is equipped with an inspection hatch.

Motor:
• Motors with IE3 efficiency for powers equal to or greater than 0.75kW, except single-phase, 2-speed and 8-pole.
• Class F motors with ball bearings and IP55 protection.
• Three-phase 230/400 V 50 Hz (up to 4 kW) and 400/690 V 50 Hz (powers greater than 4 kW).
• Working temperature: -25ºC +50 ºC.

Finishing:
• Anti-corrosive finish in polyester resin, polymerised at 190 ºC, after degreasing with phosphate-free nanotechnology treatment.

On request:
• Airflow direction from impeller to motor.
• 100% reversible impellers.
• Special windings for different voltages.
• ATEX certified Category 2.
• 2 speed motors.
• The support feet are supplied as an accessory.